cutting weapons with conditioning and clamping function in precision machining sheet metal processing factory, precision machining cutting weapons with conditioning and clamping function, base, constant column and clamping mechanism, both sides of the base are equipped with constant column, and the middle of the two constant columns is equipped with concrete floor slab, the right side of the bottom of the cast-in-place floor slab is equipped with a double arm, a micro crane is arranged under the boom, a placement plate is arranged on the left side of the micro crane, a shaft seat is arranged on the upper side of the left side of the placement plate, a twisting shaft is arranged in the shaft seat, a polishing wheel is arranged on the left side of the twisting shaft, a cutting motor is arranged on the lower left side of the plate, and a cutting head. When in use, the object to be cut is placed in the middle of the clamping jaw. Due to the benefits of the torsion spring, the placement seat encourages the coupling to rotate to both sides, thus enabling the clamping jaw to clamp the object to be cut. The ground anti-skid layer is equipped to make the object to be cut not easy to rotate, thus increasing and promoting the whole cutting process.
the walls or raw materials of SECC are ordinary cold rolled coils, which become pickling phosphating products after the sheet metal parts of the customized sheet metal chassis are continuously pickled and phosphated according to degreasing, phosphating, electroplating and various post-treatment processes. SECC not only has the general cold-rolled steel plate process performance and similar performance, but also has good corrosion resistance and decorative art design appearance. Manufacturers in electronic products, electrical products and furniture currently on the market has a great market competition and substitution. For example, the desktop computer host generally adopts SECC.
SPCC refers to stainless steel castings that are continuously cold rolled into carbon steel plate pipe or edge materials of required thickness according to cold rolling mill. The surface of SPCC has no safety maintenance, and it is easy to be oxidized when leaking in the air, especially in humid conditions, the oxidation speed is increased, and the surface is painted, electroplated or other safety protection.
hot-dip galvanized coil steel refers to the production and processing of phosphating or cold rolling hot-rolled plates into dissolved zinc tanks with an ambient temperature of about 460°C according to cleaning heat treatment, so that thick steel plates are embedded in zinc layers, and then solved through appropriate treatment and analysis. SGCC raw material is harder than SECC raw material, poor ductility (avoid deep drawing scheme design), thick zinc layer and poor arc laser welding ability.
SUS304 stainless steel plate is more corrosion-resistant than Cr (chromium) steel, high temperature resistance, good process performance, no heat treatment hardening, no plasticity.
Cr (chromium) is lower in chemical composition than SUS304 and has poor corrosion resistance. however, according to cold drawing, reasonable tensile strength and compressive strength can be obtained in sheet metal processing plants for technical hardware stamping parts, and its plasticity is very good. it is mostly used for spring torsion springs and EMI prevention.
