the division of labor and operation of stainless steel sheet metal processing need to have clear rules. on the basis of split drawing and batch, different blanking methods are not selected. the methods are the same as those of laser and sheet metal processing, numerical control punching, shearing, mold and other methods. today, I 'd like to introduce the detailed rules of manufacturing stainless steel plate processing.

1. select blanking and enter the next process after completion to process different stainless steel workpieces into corresponding processes as required;

2. when bending stainless steel materials according to the scale and thickness on the drawing, the key to the mode selection of sheet metal bending processing factory to prevent deformation caused by product collision (in the same product, different types of upper die and lower die may be used) is determined according to the thickness of the plate;

3. When we press the riveting, we should consider the same stud height, select the same mold, and then adjust the pressure of the press to ensure that the stud and the surface of the workpiece are neat to prevent the stud from being pressed into or pressed through the surface of the workpiece and forming the workpiece. Welding includes argon arc welding, spot welding, carbon dioxide repair welding, technical welding, etc. Spot welding first considers the welding direction of the workpiece, and considers the position of the stainless steel plate in mass production to ensure spot welding accuracy.

4. in order to weld firmly, the bumpy workpiece can be welded evenly before the bump welding to ensure the common contact point heating, and the welding direction can also be determined. the same should be welded, adjust the preloading time, holding time, maintenance time and rest time to ensure that the workpiece can be set on site;

the quality of stainless steel plates is strictly independent of the production quality in addition to the strict requirements of the production process. One is to strictly check the scale according to the drawings, and the other is to strictly control the appearance quality. This kind of processing is not an important thing, otherwise the effect of the process is very difficult. This can be found in the process of CNC sheet metal processing faults, bad habits in the process and faults in the process.