how to choose the raw materials for sheet metal processing of experimental equipment? in sheet metal processing of experimental equipment, the strength and rigidity of the materials used for sheet metal processing templates of experimental equipment should be higher and the thickness should not be too thin. Sheet metal used for fabricating experimental equipment must be perfectly flat; otherwise, it will compromise the dimensional accuracy of the workpiece. When making samples for sheet metal processing of experimental equipment, sharp scribing needles and sharp sample punches should be used as marks, and the lines should be made thin, and then trimmed with scissors. The edges must be neat. Finished samples shall be properly stored to prevent bending or any other deformation. Otherwise, the quality of the workpiece will be affected.

Standard or commonly used templates should be saved for reuse next time. The workpiece processing symbol shall be marked on the sheet metal processing template of the experimental equipment, and the project number, workpiece number, specification, quantity, hole diameter, etc. The words and symbols on the sample should be written in enamel, and should be correct and not scribbled. After the sheet metal processing of the experimental equipment is completed, it must be selected and checked by itself, and then inspected by the inspection department. The process of sheet metal processing of experimental equipment is relatively fine, all dimensions need to be very accurate, if there is an error, it is easy to lose. Therefore, the choice of experimental equipment sheet metal processing raw materials is important, the experimental equipment sheet metal processing process also needs to be strict.

the sheet metal processing manufacturer of experimental equipment tells you what advantages the sheet metal of the experimental equipment has. the sheet metal processing process of the experimental equipment uses high-quality stamping drawing oil in the stamping drawing process, and different stamping drawing oil for different stamping materials, for example, there is a special stainless steel drawing oil for stainless steel drawing molding, and there is a copper-aluminum drawing oil for copper-aluminum drawing. Stamping drawing oil has a good protective effect on drawing dies. Good high temperature lubricity to prevent stainless steel from sintering at high temperature; The stretching surface has high smoothness and does not stretch, burst or crack. Environmental protection products have no irritation to molds and workers' hand skin. Low viscosity, containing clean surface activity; Can effectively reduce friction between workpiece and mold, reduce wear, with a strong oil film, greatly reduce the occurrence of scratches, protect the mold.

the experimental equipment sheet metal processing has good thermal stability, strong adhesion, excellent spreadability, certain cooling effect, and can effectively control the generation of black sludge. Distribution box sheet metal processing protagonist experimental equipment sheet metal stability, very good for the processing of the entire process to improve the efficiency.