Drilling --
Use the operator cabinet import program to adjust the work starting point and select the correct processing area on the control cabinet
Press the button to turn the hole automatically.
(note: numerical control plane drill; CDMP3016A/CDMP2016 working face 1600*2000, larger processing aperture 50mm, suitable for plane drilling workpiece, material thickness less than 100mm; Radial drilling machine: Z3032 * 10 larger drilling diameter 32mm, larger Span 1000mm;Z3050*16 Larger Drill Diameter 50mm, Larger Span 1600mm)
Roll --
-p style = 2;">
Before processing, raise the front roller and place the sheet into alignment with the upper roller. The movement of the rollers is controlled by the control cabinet.
The mold can be changed according to the required shape. Four column hydraulic press larger pressure 5000 tons. The three workers directly place the workpiece on the mold for processing. Positioning is required when the requirements are high.
Radial Drilling Machines --
measure the distance of each hole on the workpiece according to the drawing to determine the empty position, and use the punching sample to punch and mark.
Clamp the workpiece, select the drill bit according to the hole diameter and set the number of revolutions.
Bender --
Adjust the dial on the clamping device to determine the bending angle according to the drawing.
Place the workpiece on the table, apply full-size sizing, and clamp the workpiece.
When you start to bend, guess the workpiece and place it.
