in the process of Ningbo sheet metal shell processing, assembly is generally required after spraying. although this is a simple assembly process, there are also many problems in the destruction of Ningbo sheet metal shell processing parts, as a result, the quality of the processed parts of Ningbo sheet metal shell does not meet the product standards. Then the assembly process of Ningbo sheet metal shell processing is as follows:

1. before assembling large sheet metal parts, it is necessary to carefully read the assembly process and its freight bill and other data.

2. take out the accessories, semi-finished products, purchased parts and other materials according to regulations, and then let special personnel manage and check them into the warehouse to prevent consumption and loss.

3. during the assembly of sheet metal shell parts, semi-finished products and tools cannot be placed in higher areas, so as to prevent objects from accidentally sliding down and hitting people or commodities.

4. in the process of assembling sheet metal shell parts, reasonable operation should be carried out according to the process sequence. attention should also be paid to the upper and lower parts. at the same time, the cooperation of operators is also very important. the parts must not be injured, it can only be modified after the consent of the relevant departments.

5. it is forbidden to place semi-finished products in areas with potential safety hazards during the processing and assembly of sheet metal shells. it is necessary to place them in a place where there is no danger of moving. the purpose is to prevent the falling of objects from causing hits to personnel, for heavy large workpieces, when lifting, moving or putting down, there should be a special person to command to prevent accidents.

In general, it is the assembly process of shaped sheet metal processing. In the process of sheet metal shell processing and assembly, the process should be reasonable, especially pay attention to the assembly sequence, and then observe the surrounding operation, pay attention to the safety of personnel on the surrounding edge, so as not to cause personal injury.